• Banner

Fräser
NAMICAM Fräswerkzeuge für die Holzbearbeitung und Werbetechnik

Fräser

12 Artikel gefunden

1 - 12 von 12 Artikel(n)
Aktive Filter

Artikel-Nr.: C03PRY1LX3.0.803

Marke: NAMICAM

Solid Carbide Single Flute Spiral Router Bits

Good for  Acrylic, PVC, plstic, also suitable for solid wood, MDF, lotus board, composite board, etc. High surface finish, undergraduate degree scraping. Usage: cutting  Material: Solid Carbide (Ultrafine particles tungsten steel made in Germany) Flute: 1 Flute Shank Diameter(SHK): 3.175~16mm Overall Length(OVL): 40~150mm Cutting Length(CEL): 3~75mm...

Preis 18,90 €
Mehr
In-Stock

Artikel-Nr.: C04PRM1LX3.10

Marke: NAMICAM

Solid Carbide Single Flute Spiral Router Bits For Solid Wood

Suitable for Solid wood,MDF,Multilayer board, etc. Usage: cutting  Material: Solid Carbide (Ultrafine particles tungsten steel made in Germany) Flute: 1 Flute Shank Diameter(SHK): 3.175~16mm Overall Length(OVL): 38~150mm Cutting Length(CEL): 3~75mm Cutting Diameter(CED): 0.8mm~16mm

Preis 6,90 €
Mehr
In-Stock

Artikel-Nr.: C09PR2LX3.0.803

Marke: NAMICAM

Solid Carbide Double Flute Spiral Router Bits

Good for Acrylic,PVC,MDF,also suitable for solid wood, lotus board, composite board, etc. High surface finish, undergraduate degree scraping. Usage: cutting  Material: Solid Carbide (Ultrafine particles tungsten steel made in Germany) Flute: 2 Flutes Shank Diameter(SHK): 3.175~20mm Overall Length(OVL): 38~150mm Cutting Length(CEL): 10~75mm Cutting...

Preis 15,90 €
Mehr
In-Stock

Artikel-Nr.: C10PRM2LX3.12

Marke: NAMICAM

Double Large Flute Spiral Bits For MDF

Suitable for Low or Middle MDF, PVC, Acrylic,etc. High surface finish,undergraduate degree scraping. Usage: cutting  Material: Solid Carbide  (Ultrafine particles tungsten steel made in Germany) Flute: 2 Flutes Shank Diameter(SHK): 3.175~20mm Overall Length(OVL): 38~150mm Cutting Length(CEL): 12~75mm Cutting Diameter(CED): 3.175mm~20mm

Preis 6,90 €
Mehr
In-Stock

Artikel-Nr.: C06PR1LXD3.102

Marke: NAMICAM

Down Cut Single Flute Spiral Bits

Suitable for Acrylic,MDF, Plywood, Soft wood, PVC, etc. Usage: cutting  Material: Solid Carbide (Ultrafine particles tungsten steel made in Germany) Flute: 1 Flute Shank Diameter(SHK): 3.175~12mm Overall Length(OVL): 40~110mm Cutting Length(CEL): 2~55mm Cutting Diameter(CED): 1~12mm

Preis 11,90 €
Mehr
In-Stock

Artikel-Nr.: C12PR2LXD3.12

Marke: NAMICAM

Down Cut Double Flute Spiral Bits

Suitable for MDF, Multilayer board, Plywood. Usage: cutting  Material: Solid Carbide  (Ultrafine particles tungsten steel made in Germany) Flute: 2 Flutes Shank Diameter(SHK): 3.175~20mm Overall Length(OVL): 40~150mm Cutting Length(CEL): 12~75mm Cutting Diameter(CED): 3.175~20mm

Preis 7,90 €
Mehr
In-Stock

Artikel-Nr.: C13PR3LXD3.12

Marke: NAMICAM

Down Cut Three Flute Spiral Bits

Suitable for MDF, Multilayer board, Plywood,Solid wood,Composite wood, etc. Usage: cutting  Material: Solid Carbide (Ultrafine particles tungsten steel made in Germany) Flute: 3 Flutes Shank Diameter(SHK): 3.175~20mm Overall Length(OVL): 40~150mm Cutting Length(CEL): 12~75mm Cutting Diameter(CED): 3.175~20mm

Preis 9,90 €
Mehr
In-Stock

Artikel-Nr.: C14PR3LX3.08

Marke: NAMICAM

Three Flute Spiral Bits

Suitable for  Acrylic, High MDF, Hardwood, Die steel. Usage: cutting  Material: Solid Carbide (Ultrafine particles tungsten steel made in Germany) Flute: 3 Flutes Shank Diameter(SHK): 3.175~20mm Overall Length(OVL): 38~150mm Cutting Length(CEL): 8~75mm Cutting Diameter(CED): 3.175mm~20mm

Preis 7,90 €
Mehr
In-Stock

Artikel-Nr.: C26PR4LX3.08

Marke: NAMICAM

Four Flute Spiral Bits

Suitable for Acrylic, High MDF, Hardwood, Die steel. Usage: cutting  Material: Solid Carbide (Ultrafine particles tungsten steel made in Germany) Flute: 4 Flutes Shank Diameter(SHK): 3.175~20mm Overall Length(OVL): 38~150mm Cutting Length(CEL): 8~75mm Cutting Diameter(CED): 3.175mm~20mm

Preis 7,90 €
Mehr
In-Stock

Artikel-Nr.: C15PR1ZX3.17

Marke: NAMICAM

Single Straight Flute Bits

Suitable for Multilayer board, Plywood, MDF, Foam,Plastic, etc. Usage: cutting  Material: Solid Carbide (Ultrafine particles tungsten steel made in Germany) Flute: 1 Flute Shank Diameter(SHK): 3.175~20mm Overall Length(OVL): 38~100mm Cutting Length(CEL): 17~45mm Cutting Diameter(CED): 3.175mm~20mm

Preis 7,90 €
Mehr
In-Stock

Artikel-Nr.: C16PR2ZX3.0.803

Marke: NAMICAM

Double Straight Flute Bits

Suitable for Multilayer board, Plywood, MDF, Foam,Plastic, etc. Usage: cutting  Material: Solid Carbide (Ultrafine particles tungsten steel made in Germany) Flute: 2 Flutes Shank Diameter(SHK): 3.175~20mm Overall Length(OVL): 38~100mm Cutting Length(CEL): 3~45mm Cutting Diameter(CED): 0.8mm~20mm

Preis 22,90 €
Mehr
In-Stock

Artikel-Nr.: C01PR0ZX3.0.8015

Marke: NAMICAM

Half Straight Bits

Suitable for Two-color plate,ABS,Acrylic cutting and engraving. Usage: cutting and engraving Material: Solid Carbide (Ultrafine particles tungsten steel made in Germany) Shank Diameter(SHK): 3.175~6mm Overall Length(OVL): 38~50mm Cutting Length(CEL): 1~17mm Cutting Diameter(CED): 0.8mm~6mm

Preis 15,90 €
Mehr
In-Stock

Folgen Sie uns auf Facebook