Reference: HSK63FFK

HSK63F Tool Holder Clamp Fork/Cradle/Gripper

HSK63F Tool Holder Clamp Fork/Cradle/Gripper High rigidity Good resilience Explosion-proof Fire-resistant Anti-corrosion

$11.78*

In stock

Reference: ISO30FK

Brand: NAMICAM

ISO30 SK30 Tool Holder Clamp Fork/Cradle/Gripper

High rigidity Good resilience Explosion-proof Fire-resistant Anti-corrosion

$11.88*

In stock

Reference: ER32-4

Brand: NAMICAM

DIN 6499B / ISO 15488 Precision ER32 Collets Runout TIR 0.008mm

Precision ER32 Collets Run out TIR 8μm Standard: DIN 6499B / ISO 15488 Material:Special elastic Steel 65Mn Hardness: HRC44-48

From $12.86*

In stock

On sale!

Reference: HSK63F-ER32-70L

Brand: NAMICAM

HSK63F Tool Holder/Collet Chuck ER32 DIN69893 Gage length 70mm

HSK63F Tool Holder Overall Rust-proof Model HSK63F-ER32-70L Standard：DIN69893 Collet Size：ER32 UM Gage length : 70mm (1.97 inches) Balance：G2.5 @ 30000 rpm Clamping jump accuracy: ≤ 0.008 Roundness : <0.8um Precision of ontology：＜ 0.003mm Carburized depth：＞ 0.8mm Product material：20 CrMnTi Hardness：HRC58-62 Vacuum quenching/integrally-formed/overall...

$60.51*

In stock

Reference: OZ25B_1/8H

Brand: NAMICAM

Collet OZ, DIN 6388B Precision Collets 462E (OZ25B)

High quality collets OZ DIN 6388, made of spring steel, hardened and precision ground, type 462E (OZ25), form B. Safe clamping of cylindrical tool shanks up to max. 0.5 mm below nominal diameter in chucks OZ according to DIN ISO 10897 B, formerly DIN 6388 B. Size: OZ25B/EOC25B Material : 65Mn Alloyed Special Elastic Steel Hardness : HRC44-48 Accuracy:...

$16.20*

In stock

Reference: ISO30-ER32-50L

Brand: NAMICAM

ISO30 Tool holder/Collet Chuck ER32 HSD/HITECO

DIN 6499B ISO30 ER32 UM Collet Chuck Overall Rust-proof Model Collet Size ER32 UM, Pull Stud Inclu. Gage length : 50mm (1.97 inches) Balance Grade: G2.5 @ 30000 rpm Clamping jump accuracy: ≤ 0.008 Roundness : 0.8um Precision of ontology：＜ 0.003mm Carburized depth：＞ 0.8mm Material: 20CrMnTi Hardness: >HRC58~62 Vacuum...

From $43.22*

In stock

Reference: DIN30FKB

Brand: NAMICAM

DIN30 Tool Holder Clamp Fork/Cradle/Gripper

High rigidity Good resilience Explosion-proof Fire-resistant Anti-corrosion

$11.88*

In stock

Reference: KB045080158005

Brand: NAMICAM

Drag blade, flat-stock, Knife Blade ZUND Z10

Knife Blade Type Z10 Drag blade, flat-stock, Max. cutting depth: 4.8 mm Angle: 50° Pre-cut: 0.84 x Tm Post-cut: 0.84 x Tm Max. cutting depth: 4.8 mm Knife thickness: 1.5 mm Knife material: HM/Carbide Applicable to cut : Carbon fibre prepreg, Carpet,Corrugated plastic - PP,Expanded PVC,Fabric - Canvas,Fabric - Mesh,Fabric - Polyester,Foil / Vinyl, Glass...

$16.20*

In stock

Reference: MSP01

Brand: NAMICAM

Mist Coolant Lubrication Cooling Sprayer 300mm

Mist Coolant Lubrication Cooling Sprayer Bend-and-Stay Coolant Hose Spray Port Material: Brass Nozzle Inner Diameter: 2.12mm Universal Joint Length: Approx. 300mm / 11.8in Liquid Inlet: Diameter 4mm Air Inlet: Diameter 8 mm The air consumption of the intake air can be adjusted freely Package List: 1 x Mist Coolant Lubrication Cooling Sprayer 1 x Water...

$21.60*

In stock

Reference: AirTac_4V21008B

Brand: AirTAC

AirTac Solenoid Valve PT 1/4" 4V210-08B DC24V

Type: 2 Position 5 Way; DC24V(4V210-08B) Inlet = Outlet = PT 1/4" Exhaust = 1/8" Fluid : Air, Water, Gas Operating Pressure: 0.15 - 0.8Mpa Package Content: 1 x Solenoid Valve

$20.52*

In stock

Reference: ER32-6_S

Brand: NAMICAM

XYZCAM Selected DIN 6499B / ISO 15488 Precision ER32 Collets Runout TIR 0.008mm

XYZCAM Selected collets, manufactured by high quality alloy spring steel, proved product which facilitates to improve tool life, part finish and reduces spindle wear. Precision ER32 Collets Run out TIR 8μm Standard: DIN 6499B / ISO 15488 Material:Special elastic Steel 65Mn Hardness: HRC44-48

From $17.18*

In stock

Reference: AKE_HSK63F_10032786

Brand: AKE Knebel GmbH

AKE HSK 63F Collet Chuck 462E/OZ25 DIN69893

Manufacturer Code : 10032786 Type: HSK 63 F A: 76mm D: 60mm / M48 d1: 3-24,4mm For Collet Chucks NO. : 462E/OZ25 (up to 25mm) n(max): 24.000 rpm Made In Germany, AKE Knebel GmbH

$91.85*

In stock

Reference: HSK63FKALUE

Brand: NAMICAM

HSK6F High-rigidity Aluminum Embedded Tool Holder/ Fork

Aluminum body + Dupont plastic, held in place by two 8mm dowels. Steel frame for extra strength. Light Weight but solid, good finish, smooth texture.

$32.41*

Pre-order now!

On sale!

Reference: L301D20ET025FL25

Brand: II-VI Incorporated

II-VI Infrared ZnSe Focus Lens Dia20mm/ET2.5mm for 80~130W

Focal length: 50.8mm/2in, 63.5mm/2.5in, 101.6mm/4in ZNSE MEN LENS For Co2 laser cutting & engraving machine Diameter: 20mm Thickness:2.5mm Made In China

$32.41*

In stock

Reference: SK40FKB

Brand: NAMICAM

SK40 Tool Holder Clamp Fork/Cradle/Gripper

Made by ABS Hardness HRC35 Precision 0.05mm Clamping Weight Max 35kg

$12.96*

In stock

All best sellers

Servo Systems

These Servo Systems include high-performance, cost-effective servo drives and motors meet the requirements for CNC machine and industrial automation applications.

Subcategories

There are 122 products.

Sort by:

Showing 1-12 of 122 item(s)

On sale!

Reference: PLDR90-5-S2-HT5PD

L Shape Reducer/ Vertical Reducer for Delta 750W AC Servo Motor

L Shape Reducer/ Vertical Reducer for Delta 750W Motor, Ratio 5 XYZCAM Standard Component for V Plus CNC Router, fit for Delta Motor ECMA-C20807

$507.92*

Last items in stock

Reference: ASD-B2-0421-B

Brand: Delta Electronics

Delta B2 Servo Drive 400W 220V 2.6Arms

B2 Servo Drive 400 Watts 220 Volts Input 1/3 Phase (PH) 2.6 Arms Output Current

$389.04*

Pre-order now!

On sale!

Reference: ECMA-C20604RS

Brand: Delta Electronics

Delta B2 Servo Motor 400W 220V 1.27NM 3000rpm

ECMA-B2 Servo Motor 400 Watts 220 Volts Input 17 Bit Resolution Kayway Model with Oil Seal Frame 60mm Shaft Diameter 14mm

$453.89*

Pre-order now!

Reference: ASD-B2-0121-B

Brand: Delta Electronics

Delta B2 Servo Drive 100W 220V 0.9Amrs

ASDA-B2 Series 100 W Phase / Voltage： Three-phase 170 ~ 255 VAC , 50/60 Hz ±5% Single-phase 200 ~ 255 VAC , 50/60 Hz ±5% Input Current (3PH) (Units: Arms)：0.39 Input Current (1PH) (Units: Arms)：0.69 Continuous Output Current (Units: Arms)：0.9

$324.20*

Last items in stock

Reference: ECMA-C20401GS

Brand: Delta Electronics

Delta B2 Servo Motor 100W 0.32Nm 3000rpm 17-bit

ECMA-C20401GS 100W 220V 0.32Nm 3000r/min Incremental 17-bit Frame 40mm Shaft 8mm

$324.20*

Last items in stock

Delta AC Servo Drive 750W 220V ASD-A2-0721-L

Reference: ASD-A2-0721-L

Brand: Delta Electronics

Delta A2 Servo Drive 750W 220V Full Closed Control

A2 Servo Drive Full Closed Control 750 Watts 220 Volts 1 Phase (PH) 5.1 Arms Output Current There are five models of ASDA-A2 series ASDA-A2-L, ASDA-A2-M, ASDA-A2-F, ASDA-A2-U, ASDA-A2-E Please CLICK TO INQUIRY All of Delta's ASDA-A2 Series meet UL, cUL, CE, and RoHS standards.

$377.17*

Pre-order now!

Reference: ASD-A2-0721-U

Brand: Delta Electronics

Delta A2 Servo Drive 750W 220V Internal Position Control

A2 Servo Drive ASD-A2-0721-U Internal Position Control 750 Watts 220 Volts 1 Phase (PH) 5.1 Arms Output Current There are five models of ASDA-A2 series ASDA-A2-L, ASDA-A2-M, ASDA-A2-F, ASDA-A2-U, ASDA-A2-E Please CLICK TO INQUIRY All of Delta's ASDA-A2 Series meet UL, cUL, CE, and RoHS standards.

$475.50*

Last items in stock

Reference: ECMA-C10807RS

Brand: Delta Electronics

Delta Servo Motor 220V 750W 2.39NM 3000rpm

ECMA Servo Motor 750 Watts 220 Volts Input 20 Bit Resolution Frame 80mm Kayway Model with Oil Seal Shaft Diameter 19mm

$377.16*

Last items in stock

Reference: LeadShine_ELP-D750Z

Brand: Leadshine

Leadshine ELP-D 750W AC Servo Drive 220V, Pulse + Direction

AC Servo Driver ELP-D750Z Command Source D Standard Version Pulse + Direction Rated Output Power : 750W Rated Output Current : 5.5A Max Out Put Current : 16 A Main Power Control Power : Singal Phase 220V -15% ~ + 10% 50/60Hz *One Year Warranty* Brand : LeadShine, Made In China

$248.55*

In stock

Reference: LeadShine_ELP-EC750Z

Brand: Leadshine

Leadshine EtherCAT 750W AC Servo Drive 220V, ELP-EC750Z

AC Servo Driver ELP-EC750Z Command Source: EtherCAT Rated Output Power : 750W Rated Output Current : 5.5A Max Out Put Current : 16.5A Main Power Control Power : Singal Phase 220V -15% ~ + 10% 50/60Hz *One Year Warranty* Brand : LeadShine, Made In China Please contact info@namicam.com for MontionStudio software.

$399.85*

Last items in stock

On sale!

Reference: LeadShine_ELMS0750DH80F-SS

Brand: Leadshine

LeadShine AC Servo Motor 750W, 17 bits, Frame 80mm, 3000rpm,No Brake

AC Servo Motor ELM0750DH80F-SS 80mm, high inertia, 750w servo motor, 17 bit inc optical, No servo holding brake Rated Voltage(Vac): 220 Rated Torque(N.m): 2.39 Peak Torque(N.m): 7.17 *One Year Warranty* Brand : LeadShine, Made In China

$194.52*

Last items in stock

On sale!

Reference: LeadShine_ELM0750DH80E-SS

Brand: Leadshine

LeadShine AC Servo Motor 750W,17 Bit, Frame 80mm, 3000rpm, with Brake

AC Servo Motor ELM0750DH80E-SS 80mm, high inertia, 750w servo motor, 17 bit inc optical, with servo holding brake Rated Voltage(Vac): 220 Rated Torque(N.m): 2.39 Peak Torque(N.m): 7.17 *One Year Warranty* Brand : LeadShine, Made In China

$280.97*

Last items in stock

Showing 1-12 of 122 item(s)

Follow us on Facebook

Facebook

HSK63F Tool Holder Clamp Fork/Cradle/Gripper

ISO30 SK30 Tool Holder Clamp Fork/Cradle/Gripper

DIN 6499B / ISO 15488 Precision ER32 Collets Runout TIR 0.008mm

HSK63F Tool Holder/Collet Chuck ER32 DIN69893 Gage length 70mm

Collet OZ, DIN 6388B Precision Collets 462E (OZ25B)

ISO30 Tool holder/Collet Chuck ER32 HSD/HITECO

DIN30 Tool Holder Clamp Fork/Cradle/Gripper

Drag blade, flat-stock, Knife Blade ZUND Z10

Mist Coolant Lubrication Cooling Sprayer 300mm

AirTac Solenoid Valve PT 1/4" 4V210-08B DC24V

XYZCAM Selected DIN 6499B / ISO 15488 Precision ER32 Collets Runout TIR 0.008mm

AKE HSK 63F Collet Chuck 462E/OZ25 DIN69893

HSK6F High-rigidity Aluminum Embedded Tool Holder/ Fork

II-VI Infrared ZnSe Focus Lens Dia20mm/ET2.5mm for 80~130W

SK40 Tool Holder Clamp Fork/Cradle/Gripper

Servo Systems

Servo Motor & Driver

Servo Accessory

L Shape Reducer/ Vertical Reducer for Delta 750W AC Servo Motor

Delta B2 Servo Drive 400W 220V 2.6Arms

Delta B2 Servo Motor 400W 220V 1.27NM 3000rpm

Delta B2 Servo Drive 100W 220V 0.9Amrs

Delta B2 Servo Motor 100W 0.32Nm 3000rpm 17-bit

Delta A2 Servo Drive 750W 220V Full Closed Control

Delta A2 Servo Drive 750W 220V Internal Position Control

Delta Servo Motor 220V 750W 2.39NM 3000rpm

Leadshine ELP-D 750W AC Servo Drive 220V, Pulse + Direction

Leadshine EtherCAT 750W AC Servo Drive 220V, ELP-EC750Z

LeadShine AC Servo Motor 750W, 17 bits, Frame 80mm, 3000rpm,No Brake

LeadShine AC Servo Motor 750W,17 Bit, Frame 80mm, 3000rpm, with Brake

Follow us on Facebook