Reference: ISO30FK
Brand: NAMICAM
High rigidity Good resilience Explosion-proof Fire-resistant Anti-corrosion
Reference: HSK63FFK
Brand: NAMICAM
HSK63F TOOL HOLDER/CLAMP FORK/CRADLE/GRIPPER High rigidity Good resilience Explosion-proof Fire-resistant Anti-corrosion
Reference: DIN30FKB
Brand: NAMICAM
High rigidity Good resilience Explosion-proof Fire-resistant Anti-corrosion
Reference: ER32-4
Brand: NAMICAM
Size - 4.0, Clamping range - 4.0 – 3.0mm Size - 6.0, Clamping range - 6.0 – 5.0mm Size - 8.0, Clamping range - 8.0 – 7.0mm Size - 10.0, Clamping range - 11.0 – 10.0mm Size - 12.0, Clamping range - 12.0 – 11.0mm Size - 1/8", Clamping range - 0.125 – 0.1154 inch Size - 1/2'', Clamping range - 0.461 – 0.500 inch Precision ER32 Collets Run out TIR 8μm...
Reference: ISO30-ER32-50L
Brand: NAMICAM
ISO30 Tool Holder Overall Rust-proof Model Collet Size ER32 UM, Pull Stud Inclu. Gage length : 50mm (1.97 inches) Balance Grade: G2.5 @ 30000 rpm Clamping jump accuracy: ≤ 0.008 Roundness : 0.8um Precision of ontology： ＜ 0.003mm Carburized depth：＞ 0.8mm Material: 20CrMnTi Hardness: >HRC58~62 Vacuum quenching/integrally-formed/overall surface rust-proof...
Reference: IGUS_CF881.03.07
Brand: IGUS
CF881.03.07 (MP 7*0.34） per meter, Min. purchase amount 5 meters.
Reference: IGUS_CF881.15.04
Brand: IGUS
CF881.15.04 (4*1.5) per meter, Min. purchase amount 5 meters.
Reference: ISO30FKY
Brand: NAMICAM
ISO30 Yellow Color Tool Holder Clamp Fork/Cradle/Gripper High rigidity Good resilience Explosion-proof Fire-resistant Anti-corrosion Yellow Color
Reference: UMWER25
Brand: NAMICAM
Spindle Wrench UM Type ER wrench ER16 ER20 ER25 ER32 ER40 Collet Chuck Spanner Made from 5mm thick high quality alloy steel Short length handle ensures collet nut is not overtightened Works on Hex style collet nuts
Reference: KB045080156007D
Brand: NAMICAM
Knife Blade Type Z13 Max. cutting depth: 6.9 mm ANGLE : 60° KNIFE HEIGHT : 50,00 mm THICKNESS : 1,50 mm MAX. CUTTING DEPTH : 6,90 mm KNIFE TYPE : Drag blade, Flat Applicable to cut : Canvas, Cardboard, Foil, Footwear materials, Gasket materials, Hard foam, Hard plastic, Magnetic foil, Paper, Plastic, Polycarbonate, Polyester fabric, PVC, Self-adhesive...
Reference: EM22_ KEG-M8SY
IP65 Protective Grade Fully Metal Housing to prevent false triggering
Reference: ER32-4
Brand: NAMICAM
XYZCAM Selected collets, manufactured by high quality alloy spring steel, proved product which facilitates to improve tool life, part finish and reduces spindle wear. Precision ER32 Collets Run out TIR 8μm Standard: DIN 6499B / ISO 15488 Material:Special elastic Steel 65Mn Hardness: HRC44-48
Reference: AirTac_4V21008B
Brand: AirTAC
Type: 2 Position 5 Way; DC24V(4V210-08B) Inlet = Outlet = PT 1/4" Exhaust = 1/8" Fluid : Air, Water, Gas Operating Pressure: 0.15 - 0.8Mpa Package Content: 1 x Solenoid Valve
Reference: D100DP06C05
Brand: NAMICAM
Suction Tube Cleaner Hose Inner Diameter 100mm Length 6000mm/6m per piece + 5 pieces Dia90~100mm Pipe Clamp
Reference: TSNC02
Brand: NAMICAM
With air blowing port Normally Closed function NC Stroke Protection function and bowing function Fully sealed desgin, water & dust proof, long lasting Automatic detection of tool breakage Automatic tool wear compensation Fixed positon or moveable on CNC machine
Our EdingCNC products at low prices: CNC controls including software licenses, breakout boards, top hat rail housing, remote control and more.
Eding CNC develops PC-based CNC solutions that are suitable for numerous CNC applications. The company has more than 25 years of experience with motion hardware, software and motion applications in the CNC field.
There are 11 products.
Reference: EdingCNC720_Kits
Brand: EdingCNC
CNC720 Control Card incl. software license *1 CNC720 BreakOut Board for CNC720 *1 CNC720 DIN Rail for PCB Support *1 Original EdingCNC Network cross-cable double shielded 10 feet / 3m *1
Reference: EdingCNC_CNC760BOB
Brand: EdingCNC
If you prefer to use separate wires to hook up your CNC760 this breakout board will help you. Simply plugin this on top of the CNC760 and start wiring your controller.
Reference: EdingCNC_CNC760_Kits
Brand: EdingCNC
CNC760 Control Card 6 Axis (SW licence included) * 1 CNC760 DIN rail mount * 1 CNC760 Breakout Board * 1 CNC760 Axis Breakout Board* 1 EdingCNC original Network cross-cable double shielded 10 feet / 3m * 1
Reference: Eding CNC_CNC720
Brand: EdingCNC
100Mbit Ethernet interface Step frequency 400 kHz Up to 4 axes simultaneously 24VDC input voltage Expandable through a Modbus RTU interface Digital I/O, 2 analog inputs, 0-10V output or PWM output, pendant interface Full software license is included in the purchase price
Reference: EdingCNC_CNC760
Brand: EdingCNC
6 axis ethernet controller 100Mbit Stepfrequenty up to 400KHz Power supply 24VDC Modbus-RTU interface
Reference: EdingCNC_CNC720BOB
Brand: EdingCNC
The breakout board makes it easy to connect your CNC720 with loose wires. 1x Breakout board 4x PCB Spacer 19mm 4x PCB spacer 8mm 8x Screw M3 6mm
Reference: CNC760ABB
Brand: EdingCNC
With this breakout board you can now also simply connect the axis and extruder outputs of the CNC760 with wires.
Reference: EdingCNC_CNC720DRM
Brand: EdingCNC
To easily mount the CNC720 Controller on a DIN rail you can slide it into this housing and simply mount it on the DIN rail.
Reference: EdingCNC_CNC760DRM
Brand: EdingCNC
To easily mount the CNC760 Controller on a DIN rail you can slide it into this housing and simply mount it on the DIN rail.
Reference: EdingCNCC3M
Brand: EdingCNC
For a reliable connection between our Ethernet solutions and a PC, a cross-over cable is requiered. These network cables are high quality cables with double shielding keeping out any external interference.
Reference: EdingCNCMPG
Brand: EdingCNC
USB rceceiver + magnetic bottom + suspension bracket Wirelessly operate a machine up to 6 axis Supported from version 4.03.14 of our software This pendant operates on 2 AA batteries (not included).
