- On sale!

Reference: HSK63FFK
Brand: NAMICAM
HSK63F Tool Holder Clamp Fork/Cradle/Gripper High rigidity Good resilience Explosion-proof Fire-resistant Anti-corrosion
Reference: ISO30FK
Brand: NAMICAM
High rigidity Good resilience Explosion-proof Fire-resistant Anti-corrosion
Reference: ER32-4
Brand: NAMICAM
Size - 4.0, Clamping range - 4.0 – 3.0mm Size - 6.0, Clamping range - 6.0 – 5.0mm Size - 8.0, Clamping range - 8.0 – 7.0mm Size - 10.0, Clamping range - 11.0 – 10.0mm Size - 12.0, Clamping range - 12.0 – 11.0mm Size - 1/8", Clamping range - 0.125 – 0.1154 inch Size - 1/2'', Clamping range - 0.461 – 0.500 inch Precision ER32 Collets Run out TIR 8μm...
Reference: DIN30FKB
Brand: NAMICAM
High rigidity Good resilience Explosion-proof Fire-resistant Anti-corrosion
Reference: ISO30-ER32-50L
Brand: NAMICAM
ISO30 Tool Holder Overall Rust-proof Model Collet Size ER32 UM, Pull Stud Inclu. Gage length : 50mm (1.97 inches) Balance Grade: G2.5 @ 30000 rpm Clamping jump accuracy: ≤ 0.008 Roundness : 0.8um Precision of ontology: < 0.003mm Carburized depth:> 0.8mm Material: 20CrMnTi Hardness: >HRC58~62 Vacuum quenching/integrally-formed/overall surface rust-proof...
Reference: ISO30FKY
Brand: NAMICAM
ISO30 Yellow Color Tool Holder Clamp Fork/Cradle/Gripper High rigidity Good resilience Explosion-proof Fire-resistant Anti-corrosion Yellow Color
Reference: HSK63F-ER32-70L
Brand: NAMICAM
HSK63F Tool Holder Overall Rust-proof Model HSK63F-ER32-70L Standard:DIN69893 Collet Size:ER32 Gage length : 70mm (1.97 inches) Balance:G2.5 @ 30000 rpm Clamping jump accuracy: ≤ 0.008 Roundness : <0.8um Precision of ontology: < 0.003mm Carburized depth:> 0.8mm Product material:20 CrMnTi Hardness:HRC58-62 Vacuum quenching/integrally-formed/overall...
Reference: IGUS_CF881.03.07
Brand: IGUS
CF881.03.07 (MP 7*0.34) per meter, Min. purchase amount 5 meters.
Reference: IGUS_CF881.15.04
Brand: IGUS
CF881.15.04 (4*1.5) per meter, Min. purchase amount 5 meters.
Reference: AirTac_4V21008B
Brand: AirTAC
Type: 2 Position 5 Way; DC24V(4V210-08B) Inlet = Outlet = PT 1/4" Exhaust = 1/8" Fluid : Air, Water, Gas Operating Pressure: 0.15 - 0.8Mpa Package Content: 1 x Solenoid Valve
Reference: ER32-6_S
Brand: NAMICAM
XYZCAM Selected collets, manufactured by high quality alloy spring steel, proved product which facilitates to improve tool life, part finish and reduces spindle wear. Precision ER32 Collets Run out TIR 8μm Standard: DIN 6499B / ISO 15488 Material:Special elastic Steel 65Mn Hardness: HRC44-48
Reference: MSP01
Brand: NAMICAM
Mist Coolant Lubrication Cooling Sprayer Spray Port Material: Brass Nozzle Inner Diameter: 2.12mm Universal Joint Length: Approx. 300mm / 11.8in Water Inlet: Diameter 8mm Air Inlet: Diameter4mm The air consumption of the intake air can be adjusted freely Package List: 1 x Mist Coolant Lubrication Cooling Sprayer 1 x Water Pipe
Reference: HSK63FKALUE
Brand: NAMICAM
Aluminum body + Dupont plastic, held in place by two 8mm dowels. Steel frame for extra strength. Light Weight but solid, good finish, smooth texture.
Reference: UMWER25
Brand: NAMICAM
Spindle Wrench UM Type ER wrench ER16 ER20 ER25 ER32 ER40 Collet Chuck Spanner Made from 5mm thick high quality alloy steel Short length handle ensures collet nut is not overtightened Works on Hex style collet nuts
Reference: L301D20ET02FL25
Brand: II-VI Incorporated
Focal length: 50.8mm/2in, 63.5mm/2.5in, 101.6mm/4in For Co2 laser cutting & engraving machine Diameter: 20mm Thickness:2.5mm Made In China
RichAuto-A11 model, 3 axis CNC milling controller from Chinese leading developer RichAuto.
Buyer Reading :
DSP A11 product from RichAuto already been upgraded, so please purchase according to your own needs, NAMICAM recommend to order by a suit derectly, the reason is the upgraded version remote handle of DSP A11 cannot work with old version A11 card. The the most intuitive point is new version remote handle has an orenge color square frame around keypad, please check and confirm if the remote handle in your hand already has this feature, you could order new card by this link. Below is the offcial declaration from RichAuto company, which describes the difference between the new version and the old version, please read to know.
Buyer Reading :
DSP A11 product from RichAuto already been upgraded, so please purchase according to your own needs, NAMICAM recommend to order by a suit derectly, the reason is the upgraded version remote handle of DSP A11 cannot work with old version A11 card. The the most intuitive point is new version remote handle has an orenge color square frame around keypad, please check and confirm if the remote handle in your hand already has this feature, you could order new card by this link. Below is the offcial declaration from RichAuto company, which describes the difference between the new version and the old version, please read to know.
The picture above shows the new version of our company's A1X system (hereinafter referred to as the orange version):
At present, the changes and precautions are explained:
1. The features of new version of A1X are:
There is an orange frame on the handle buttons, and a silk screen on the upper right end of the wiring board.
2. The compatibility of this version of A1X system has been adjusted:
The old version of the handle can use the orange version of the wiring board, the orange version of the handle can not use the old version of the wiring board
That is, the orange version of the wiring board can be interchanged with the old version of the system, but the orange version of the handle cannot.
3. The current orange version of the handle has changed the internal 24V power supply line, so the USB mode has been temporarily cancelled. If the USB mode is added again later, another notice will be given.
4. The orange version of the wiring board has updated the output circuit protection part, which effectively prevents the abnormal rotation of the spindle after the power is off.
5. The orange version of the system can only modify the parameters when the terminal board is used for power supply. When using a computer to modify the parameters, the parameters cannot be saved.
Product Feature
New three-axis linkage motion mode to achieve comprehensive controlling
Support XYZ axis driver and spindle error alarm function
Large storage space, perfect U disk compatibility, fast reading speed, safe and reliable U disk-processing.
Support intelligent file checking function.
Parameter backup and restore function to prevent the loss of important parameters.
High anti-jamming intensity passes many CE tests.
Intelligent processing memory, supports power fail safeguard and breakpoint function.
Definable I/O interfaces provide customers a wide range of development platforms.
Product Model | RichAuto-A11 |
CPU | DSP |
Internal Memory | 512Mb |
Display Screen | 128*64 Monochrome LCD |
Communication Port | U disk、USB cable |
Controlled Axis Number | 3 axis |
Control Signal | differential signal |
Drive System | step motor/servo motor |
Minimum Input Unit | 0.001mm |
No Volt Protection | Support |
Breakpoint Processing Function | Support |
External Power Supply Voltage | 24V DC |
Manual Mode | Continuous、point move、distance |
Interpolation Method | line、arc、curve |
Soft/Hard Limit | support |
Maximum Pulse Frequency | 1M/S |
Password Protection | support |
Support Language | English |
Standard Configuration | (1) DSP Handle (1) 50 core cable (1) USB cable (1) 8 I/O Wiring board (1) data CD |
A1X_Motion_Control_System(A11,A12,A15,A18_Manual)
Download (2.65MB)Reference: NK105G3
Brand: WEIHONG
NK105-G3 3 axis cnc control system is developped by Shanghai Weihong Electronic Technology Co., Ltd, which is one of Chinese famos developer and maker on CNC motion control, WEIHONG is well known by its NC studio PCI control system. NK105 model is controlled by handheld terminal and motion control card, it is similar to DSP A11 model from RichAuto, but...
Reference: DSP_50Pin_C2.5
For RichAuto DSP A11 A12 A15 A18 Controller Dust-proof Cable Length 2.5m * 1 piece
Reference: DSP_50Pin_C4.0
For RichAuto DSP A11 A12 A15 A18 Controller Dust-proof Cable Length 4.0m * 1 piece
RichAuto-A11 model, 3 axis CNC milling controller from Chinese leading developer RichAuto.
Buyer Reading :
DSP A11 product from RichAuto already been upgraded, so please purchase according to your own needs, NAMICAM recommend to order by a suit derectly, the reason is the upgraded version remote handle of DSP A11 cannot work with old version A11 card. The the most intuitive point is new version remote handle has an orenge color square frame around keypad, please check and confirm if the remote handle in your hand already has this feature, you could order new card by this link. Below is the offcial declaration from RichAuto company, which describes the difference between the new version and the old version, please read to know.