Reference: ER32-4

Brand: NAMICAM

DIN 6499B / ISO 15488 Precision ER32 Collets Runout TIR 0.008mm

Size - 4.0, Clamping range - 4.0 – 3.0mm Size - 6.0, Clamping range - 6.0 – 5.0mm Size - 8.0, Clamping range - 8.0 – 7.0mm Size - 12.0, Clamping range - 12.0 – 11.0mm Size - 1/8", Clamping range - 0.125 – 0.1154 inch Size - 1/2'', Clamping range - 0.461 – 0.500 inch Precision ER32 Collets Run out TIR 8μm Standard: DIN 6499B / ISO 15488...

Price $10.70*
More
In stock

Reference: ISO30-ER32-50L

Brand: NAMICAM

ISO30 Tool holder/Collet Chuck ER32 HSD/HITECO

ISO30 Tool Holder Overall Rust-proof Model Collet Size ER32, Pull Stud Inclu. Balance Grade: G2.5 @ 30000 rpm Clamping jump accuracy: ≤ 0.008 Roundness : 0.8um Precision of ontology: < 0.003mm Carburized depth:> 0.8mm Material: 20CrMnTi Hardness: >HRC58~62 Vacuum quenching/integrally-formed/overall surface rust-proof handling Made In China, 1 piece per...

Price $43.22*
More
In stock

Reference: UMWER25

Brand: NAMICAM

UM WRENCH ER16/20/25/32/40

Spindle Wrench UM Type ER wrench ER16 ER20 ER25 ER32 ER40 Collet Chuck Spanner Made from 5mm thick high quality alloy steel Short length handle ensures collet nut is not overtightened Works on Hex style collet nuts

From Price $18.36*
More
In stock

Reference: LA38-11ZS

Emergency Stop PushButton 22mm 1NO/1NC

LA38-11ZS EM-stop Button Voltage : <=440V  10A Panel cutout diameter : 22mm Diameter of mushroom cap: 40mm Contact type : 1NO (Normally Open) 1NC (Normally Close) Made In China

Price $12.96*
More
In stock

Reference: RT18-32-1P

Brand: Delixi electric

DELIXI RT18-32 DIN Rail Mount Fuse Base 32A 1P/2P/3P

DELIXI RT18-32 Fuse Base AC 380V 32A  DIN Rail Mount cylinder base  Suitable for 10x38MM FUSE  Without indicator light Rated voltage: 380-500V AC Rated current: 2-125A Ics kA: 100Ka Certificate: CE/CCC 35mm Guideway Installation 

From Price $5.40*
More
In stock

Reference: KB054606007

Brand: NAMICAM

Oscillating Blade Knife Type Aristo 7354

Free Shipping in Germany Knife Type:  Round shank blades oscillating Suitable for Aristo 7354 Knife Length : 46,00 mm Shank diameter: 6mm MAX. Cutting Depth : 25,00 mm Applicable to cut : foam board, foamboard w/ paper surface, foam materials, foam materials, soft foam board, corrugated board, packaging material MADE IN CHINA

Price $54.02*
More
Pre-order now!

Reference: MSA20SSSFCN

Brand: PMI

PMI20 Square Sliding Block & Carriage MSA-S Heavy Load

Model No.: MSA 20 S SS FCN Series : MSA Sze: 20 Carriage type : S square type Dust protection : SS (Bidirectional end seal+Bottom seal) Preload: FC (light prelod) Accuracy grade : N  / Made in Taiwan

Price $38.89*
More
In stock
All best sellers

EdingCNC 4-Aixs CNC720 Control incl. software license

EdingCNC_CNC720

100Mbit Ethernet interface

Step frequency 400 kHz

Up to 4 axes simultaneously

24VDC input voltage

Expandable through a Modbus RTU interface 

Digital I/O, 2 analog inputs, 0-10V output or PWM output, pendant interface

Full software license is included in the purchase price

$426.88
Tax excluded Shipping excluded * Delivery time 1-3 days
Quantity
In stock

Description

CNC720 4-Axis Ethernet 400kHz Modbus-RTU 24V

The CNC720 CNC controller is a 4-axis controller with a maximum step frequency of 400 kHz. This controller can be used and configured entirely via Ethernet. In addition, it has a Modbus-RTU interface through which it is possible to expand its functionality.

It is powered by 24V making it simple to integrate into an industrial environment in which 24V is common. Also, almost all inputs are also suitable for 24V, whereby it is also possible to configure some inputs for an NPN or PNP application.

The controllers features an E-STOP input that switches off hardware outputs through hardware in the event of an E-STOP situation, giving it extra safety*. And finally, the CNC7xx series has the unique ability to control the PWM output during the movement of the axis, making it especially useful for laser applications.

The board features 2 standard boxheaders (IDC) giving the possibility to simply connect the board to custom boards. For easy connecting wires a separate breakout board exists. And for quick installation a custom  DIN rail enclosure is available.

Outputs:

- 4x step/direction/enable/enable open collector (400 kHz)

- AUX (open collector)

- PWM (open collector) / 0-10V

- System ready

- No E-STOP (open collector)

- Tool

- 2x Cool

- Run

- Pause

- Charge pump

- RS485 (Modbus RT)

Inputs:

Handwheel (A/B)

2x Analogue

4x Home

E-stop

Probe / Tool sensor

Spindle sensor

Others:

Power: 24VDC

Dimensions: 100 x 107mm

4x axis controller interface Pulse/Direction 5V (max. 400kHz)
Enable 5V
Alarm Max. 24V (PNP or NPN)
     
4x digital HOME inputs Max. 24V (PNP or NPN)
1x digital outputs (AUX) Open collector (max. 24V)
1x Alarm input Max. 24V (PNP or NPN)
2x Analog inputs 0-3.3v (12 bits)
1x Analog outputs 0-10V
2x Cooling outputs Open collector (max. 24V)
1x PWM outputs Open collector (max. 24V)
Safety relay I/O Output System Ready Output for safety relay (Watchdog) Open Collector
Input External Error Max. 24V (PNP or NPN)
Input E-Stop  
1x Length detection input (Probe) Max. 24V (PNP or NPN)
1x Spindle encoder input 5V input
1x RS485 interface RS485, MODBUS compatible (for connecting extra I/O or functionality, cable length up to 20m)
Handwheel interface (Pendant) 2x digital input 5V
  2x MPG input 5V
  2x analog input 0-3.3V
Interface 100Mbit Ethernet
Power Supply 24VDC
Dimension 100x107mm (suitable for DIN rail mounting)
Others Firmware upgradable through network connection
Product Details
EdingCNC_CNC720
5 Items
Attachments
Download
You might also like

Reference: EdingCNC_CNC720BOB

Brand: EdingCNC

EdingCNC BreakOut Board for CNC720

The breakout board makes it easy to connect your CNC720 with loose wires.  1x Breakout board 4x PCB Spacer 19mm 4x PCB spacer 8mm 8x Screw M3 6mm

Price $46.68*
More
In stock

Reference: XVSOPOP

XVS Mark Reader (OPOS) Software + License

XVS Mark Reader (OPOS) System is a powerful image recognition tool which works together with Eding CNC to allow perfect cutting of any printed job.  XVS works by using the camera attachment of your CNC machine to recognize special Marks on your drawings. The cutting job is then automatically aligned using those Marks. This product including XVS Mark...

Price $1,837.20*
More
In stock