Reference: ISO30FK
Brand: NAMICAM
High rigidity Good resilience Explosion-proof Fire-resistant Anti-corrosion
Reference: HSK63FFK
Brand: NAMICAM
HSK63F TOOL HOLDER/CLAMP FORK/CRADLE/GRIPPER High rigidity Good resilience Explosion-proof Fire-resistant Anti-corrosion
Reference: DIN30FKB
Brand: NAMICAM
High rigidity Good resilience Explosion-proof Fire-resistant Anti-corrosion
Reference: ER32-4
Brand: NAMICAM
Size - 4.0, Clamping range - 4.0 – 3.0mm Size - 6.0, Clamping range - 6.0 – 5.0mm Size - 8.0, Clamping range - 8.0 – 7.0mm Size - 12.0, Clamping range - 12.0 – 11.0mm Size - 1/8", Clamping range - 0.125 – 0.1154 inch Size - 1/2'', Clamping range - 0.461 – 0.500 inch Precision ER32 Collets Run out TIR 8μm Standard: DIN 6499B / ISO 15488...
Reference: ISO30-ER32-50L
Brand: NAMICAM
ISO30 Tool Holder Overall Rust-proof Model Collet Size ER32, Pull Stud Inclu. Balance Grade: G2.5 @ 30000 rpm Clamping jump accuracy: ≤ 0.008 Roundness : 0.8um Precision of ontology： ＜ 0.003mm Carburized depth：＞ 0.8mm Material: 20CrMnTi Hardness: >HRC58~62 Vacuum quenching/integrally-formed/overall surface rust-proof handling Made In China, 1 piece per...
Reference: UMWER25
Brand: NAMICAM
Spindle Wrench UM Type ER wrench ER16 ER20 ER25 ER32 ER40 Collet Chuck Spanner Made from 5mm thick high quality alloy steel Short length handle ensures collet nut is not overtightened Works on Hex style collet nuts
Reference: ER32-4
Brand: NAMICAM
XYZCAM Selected collets, manufactured by high quality alloy spring steel, proved product which facilitates to improve tool life, part finish and reduces spindle wear. Precision ER32 Collets Run out TIR 8μm Standard: DIN 6499B / ISO 15488 Material:Special elastic Steel 65Mn Hardness: HRC44-48
Reference: D100DP06C05
Brand: NAMICAM
Suction Tube Cleaner Hose Inner Diameter 100mm Length 6000mm/6m per piece + 5 pieces Dia90~100mm Pipe Clamp
Reference: LA38-11ZS
LA38-11ZS EM-stop Button Voltage : <=440V 10A Panel cutout diameter : 22mm Diameter of mushroom cap: 40mm Contact type : 1NO (Normally Open) 1NC (Normally Close) Made In China
Reference: TSNC02
Brand: NAMICAM
With air blowing port Normally Closed function NC Stroke Protection function and bowing function Fully sealed desgin, water & dust proof, long lasting Automatic detection of tool breakage Automatic tool wear compensation Fixed positon or moveable on CNC machine
Reference: MSA25SSSFCN
Brand: PMI
Model No.: MSA 25 S SS FCN Series : MSA Sze: 25 Carriage type : S squre type Dust protection : SS (Bidirectional end seal+Bottom seal) Preload: FC (light prelod) Accuracy grade : N /Made in Taiwan
Reference: RT18-32-1P
Brand: Delixi electric
DELIXI RT18-32 Fuse Base AC 380V 32A DIN Rail Mount cylinder base Suitable for 10x38MM FUSE Without indicator light Rated voltage: 380-500V AC Rated current: 2-125A Ics kA: 100Ka Certificate: CE/CCC 35mm Guideway Installation
Reference: KB054606007
Brand: NAMICAM
Free Shipping in Germany Knife Type: Round shank blades oscillating Suitable for Aristo 7354 Knife Length : 46,00 mm Shank diameter: 6mm MAX. Cutting Depth : 25,00 mm Applicable to cut : foam board, foamboard w/ paper surface, foam materials, foam materials, soft foam board, corrugated board, packaging material MADE IN CHINA
Reference: MSA20SSSFCN
Brand: PMI
Model No.: MSA 20 S SS FCN Series : MSA Sze: 20 Carriage type : S square type Dust protection : SS (Bidirectional end seal+Bottom seal) Preload: FC (light prelod) Accuracy grade : N / Made in Taiwan
Reference: XYZL-BE-017
Standard component for XYZL-Be laser cutter, X, Y axis pully assemly, please choose by number ①~④
Standard component for EXLAS/XYZL CO2 Laser Machines with RECI W6/W8 130W ~150W Co2 Laser Tubes
Application：
HY-T150 Laser Power Supply is used for 100W,120W, 130W,150W Cutting and Engraving Acrylic, Fabric, Double Color Sheet and Rubber, etc.
Main Features：
1) Good compatibility: It can be applicable to 100W,120W,130W,150W laser tubes manufactured by different factories.
2) High output Voltage and high output Current: when input AC220V and output current up to 38mA,the Voltage can be up to 50KV.
3) High Voltage Power Supply: Input AC 220V or AC 110V Voltage ,Max output DC 50KV.
4) This Power Supply has the ”TEST” button which can test output laser manually.
5) Easy Control: The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, etc.
6) Easy control of laser power: Both 0-5V analog signal and PWM signal can control the laser power.
7) The power supply has the function of open circuit protection: Under the condition of good protective earthing, the power supply can work in open-circuit condition for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply.
8) The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser.
9) The power supply adds a new function, that is timely scene judging which part is damaged, laser tube or laser power.
Specification:
|
Input |
Input Voltage |
AC220V or AC110V（to be specified when placing order） |
|
|
AC frequency |
47—440HZ |
||
|
Cold Surge Current |
≤60A(AC220V Input) |
≤30A(AC110 Input) |
|
|
Current Leakage |
≤0.7mA（AC220V Input） |
≤0.4mA(AC110V Input) |
|
|
Output |
Max Output Voltage |
DC 50KV |
|
|
Max Output Current |
DC 38mA |
||
|
Efficiency |
≥90﹪（full load） |
||
|
Mean Time Between Failure (MTBF) |
≥10000H |
||
|
Response Speed |
≤1ms（from the switch Signal is given to the output current up to 90% of the setting current） |
||
|
Control Interface |
TTL level switch control; high or low effective level can be chosen (details refer to the control terminal specification) |
||
|
Pressure-proof |
Input-Output, Input-Shell: AC1500V 10MA 60S; Output negative is connected with machine shell. |
||
|
Protection |
can work in open-circuit condition for a short time（Require a good protective earthing and avoid arc between the positive and the machine shell） |
||
|
Environmental |
Operating Temperature：-10~40℃，Relative Humidity (RH)：≤90﹪ |
||
|
Cooling Way |
Force-Air Cooling (FAC) |
||
|
Dimension |
L×W×H=325*240*95(mm) |
||
.jpg)
.jpg)
Standard component for EXLAS/XYZL CO2 Laser Machines with RECI W6/W8 130W ~150W Co2 Laser Tubes
