HSK63F Tool Holder Clamp Fork/Cradle/Gripper
Tool holder forks for popular CNC machine tool racks
High rigidity
Good resilience
Explosion-proof
Fire-resistant
Anti-corrosion
Click to order aluminium version HSK63F fork
Click to order HSK63F Tool Holder
Click to order Germany-made AKE Tool Holder HSK63F
ISO30 TOOL HOLDER/CLAMP FORK/CRADLE/GRIPPER
Tool holder forks for popular CNC machine tool racks
High rigidity
Good resilience
Explosion-proof
Fire-resistant
Anti-corrosion
Click to order aluminium version ISO fork
Click to order Split Type ISO30 Tool Holder
Click to order ISO30-ER32 Tool Holder
For Rotary Knife Tool / Rotary Cutting Module/ Texitiles, fabric Cutting head RCT91103 Wheel Knife
Made by tungsten steel, Made In China
External Diameter: 20 - 50 mm Optional
Inner Diameter: 8mm
Thinckness: 0.63mm
If you choose these blades to work with NAMiCAM RCT91103 Rotary Cutting Tool, please refer to the cutting thickness data below :
External...
High quality collets OZ DIN 6388, made of spring steel, hardened and precision ground, type 462E (OZ25), form B. Safe clamping of cylindrical tool shanks up to max. 0.5 mm below nominal diameter in chucks OZ according to DIN ISO 10897 B, formerly DIN 6388 B.
Size: OZ25B/EOC25B
Material : 65Mn Alloyed Special Elastic Steel
Hardness : HRC44-48
Accuracy:...
Made by high rigidity aluminium alloy and is machined from solid, greatly increasing strength and durability, as well as guaranteeing excellent precision in tool changes.
Focal length: 50.8mm/2in, 63.5mm/2.5in, 101.6mm/4in
ZNSE MEN LENS
For Co2 laser cutting & engraving machine
Diameter: 20mm
Thickness:2.5mm
Made In China
Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to
Engineering Data on Data Sheet.)
Standard sensing object
Iron, 15 × 15 × 1 mm
Response time
2 ms max.
Response frequency *
500 Hz
Power supply voltage
12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
(operating voltage range)
Current consumption
10 mA max. at 24 VDC
Control Output
Load current
TL-Q5MC[]:
NPN open collector,
50 mA max. at 30 VDC max.
TL-Q5MB[]:
PNP open collector,
50 mA max. at 30 VDC max.
Residual voltage
1 V max. (under load current of 50 mA with
cable length of 2 m)
Indicators
Detection indicator (red)
Operation mode (with sensing object approaching)
B1/C1 Models: NO
C2 Models: NC
Refer to the timing charts under DC 3-Wire Models on Catalog for details.
Protection circuits
Reverse polarity protection, Surge suppressor
Ambient temperature range
Operating/Storage: -25 to 70°C (with no icing or condensation)
Ambient humidity range
Operating/Storage: 35% to 95% (with no condensation)
Temperature influence
±20% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
Voltage influence
±2.5% max. of sensing distance at rated voltage in rated voltage ±10% range
Insulation resistance
5 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength
500 VAC, 50/60 Hz for 1 min between current-carrying parts and case
Vibration resistance
Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
Destruction: 200 m/s2 10 times each in X,Y, and Z directions
Degree of protection
IEC IP67
Connection method
Pre-wired Models (Standard cable length: 2 m)
Weight (packed state)
Approx. 90 g
Materials
Case
Heat-resistant ABS
Sensing surface
Accessories
Instruction manual
* The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.
Automatic Detection TL-Q5MC1-Z directional control cylinder
Standard holder 1 pc inclu.
Rectangular Proximity Sensor NPN Normally Open 24V
Standard component for XYZCAM V Series CNC Router Machines
