Edelstahl Werkzeuglängensensor (NC) mit Luftanschluss 4-adriges Kabel

Body Size:  35x50x65mm

Output mode : NC (normally closed)

Stroke : 2.5 mm

Pretravel : 0

Repeat positioning accuracy : 0.002 mm (working speed: 50-200mm/min)

Contact surface : Dia14 mm

Contact force : 1.0 N (installation state : vertical)

Contact material : Cemented carbide

Shell material : Grinding 4S

Tigger Life : 3000000 times

Protection level : IEC IP67

Cable : 2 meters (4 core cable Dia5mm) tensile strength 20N / Minimum bending radius R7

Outpoint rating : DC24V 60mA

Blowing fuction : Yes

LED indicator : NON

One piece per pack, Made In China

Installation Notes:

1. The pillar and the tool setting device must be perpendicular to the contact surface and perpendicular to the contact surface. Please install them on a workbench with small iron filings as much as possible.

2. Make sure to use the voltage within the rated power supply range, please control DC10-30V, the current is less than 20mA, and the ambient temperature range is 0~+60°C (Ice-free) .

3. Please control the tool diameter to be less than 20mm, and the cutting speed to be less than 50-200mm/min. The center of the tool should fall on the center of the tool face.