Using Effects
Power:130w/170W
PS：This type tube can continuously input 35mA operation, and will obtain higher power.
Cutting Material：WOOD / 3MM Thickness
Cutting Speed：80mm/S
Youtube cutting view https://youtu.be/9O2Fvh48FyA
NAMICAM is proudly to be the partner of GSI-branded CO2 laser tubes in Germany.
GSI tubes are the real founder of CO2 laser tubes, with more 40 years history, offering exceptional reliability and beam.
| Specification of HLC130 |
| Output Power(Rated power/Max power)(W) |
130W/170W |
| Beam Quality(㎡) |
≤1.1 |
| Beam Waist(2W)(mm) |
6.4 |
| Beam Divergence(mrad full angle) |
3.1 |
| Pointing Stability(mrad） |
＜0.1 |
| Typical Power Stablilty(±% after warm up) |
5 |
| Power stability(Within 20 minutes after startup±%） |
3 |
| Maximum Strike Voltage(KV) |
40 |
| Rated Operating Current/Absolute max.(mA) |
20/35 |
| Optimum operating current(mA）/(W） |
25/150 |
| Dynamic Range |
Positive high pressure |
| Electrical Requirements |
6﹕1 |
| Single Phase 110V/60Hz(A) |
7 |
| Cooling Requirements |
Water Temperature 15-25C° |
| Min/Max Pressure(bar) |
2∕5 |
| Cooling (I/min)(de-ionized water) |
4 |
| Water cooling(W) |
650 |
| Diameter(mm) |
80 |
| Length(mm) |
1700 |
| Weight(KG) |
3.8 |
| Warranty |
18 months |
Special Cargo Reminder (CO2 Laser Tube) :
Make sure that you check the package before accepting the goods and only accept them when the goods are in perfect condition. If the packaging or the product is damaged, this must be recorded and the goods must not be accepted.
